| Author |
What can I do if I want to use my cell for notebook to go internet..? |
Talon88
Joined: Feb 06, 2002
Posts: 58
From: Canada
PM |
What can I do if I want to use my cell for notebook to go internet..?
I am using T68 w/ Rogers Canada. I have Voice Cell Line but no Data Line.
But I can go to WAP with my T68 by GPRS. Can I use my laptop with infrared
any my T68 to go html internet..?
Any Information for setup my Notebook..?
Thanks
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
[=Talon88=]
- Ericsson T610,z600,T68i,T68m-Gold,T39-IceBlue
- Motorola V60G(Craps,Sold) |
|
|
arnoldc
Joined: Dec 14, 2001
Posts: > 500
From: Philippines
PM, WWW
|
1. You need to configure a GPRS Data account (normally, it is different from WAP over GPRS), so ask Rogers.
2. Configure dial-up networking, on your notebook. The number should be given to you by Rogers (which looks like *99***2#) |
Talon88
Joined: Feb 06, 2002
Posts: 58
From: Canada
PM |
Thanks for reply...!
My T68 is reconized by WinXP & use General IrDA Modem Driver. I can make a Dial up with the T68. Do I need to put any IP setting at my IrDa Connect DUN property under Windows..?
eg: user ID, Password, IP address ....
Thanks for more information..! |
GOwin
Joined: Jan 17, 2002
Posts: > 500
From: .uʍop ǝpısdn s&
PM, WWW
|
Yes, you can use your notebook to go to the net over GPRS. Though, I use a palm m505+T39m combo most of the time (like now), I have configured my laptop for GPRS dial-up in case I would want to use it.
Just create a new dial-up account using your newly created IrDA modem, use phone #: "*99**1#", no quotes. If your phone's data account's CID is not "1", change the number to the same CID that you use.
Make sure that you uncheck "use area code" from dialing properties. Use only " TCP/IP" and let TCP/IP auto-detect the IPs and DNS.
This works for my network, some tweaking may be required to make it work for you. |
jh67
Joined: Nov 30, 2001
Posts: > 500
From: denmark
PM, WWW
|
GOWIN : A question from me : you still need to use the T-68 ir-modem driver from sonyericssons site, right ?
Reason : I got two drivers from Ericsson (they send them to me).
They are called
erit68.inf
and
erit68ir_nt.inf
To be honest I dont know which one to use ?
I use win ME and IR.
Jan
|
GOwin
Joined: Jan 17, 2002
Posts: > 500
From: .uʍop ǝpısdn s&
PM, WWW
|
the standard IR drivers should work. (My T39 was autodetected by XP)
erit68.inf <--- you should use this.
erit68ir_nt.inf <---- this is for windows NT
i didn't get my inf files from sonyericsson, it was an unofficial driver this page.
The page is dedicated to configuring ericsson phones and laptops. |
jh67
Joined: Nov 30, 2001
Posts: > 500
From: denmark
PM, WWW
|
Gowin : thanks.
I did have a closer look at the other one, and saw that it said NT.
My T-68 is reconized too by ME (standard ir).
I can send e.g. pictures,melodies.
(i still have the T-39 software on the laptop, seems to work ok. I will put the T-65 full-package on the laptop instead)
I was told that if I wanted to use the T-68 as modem,..I had to install the erit68.inf.
Is this wrong info ? or ??? 
Jan
|
arnoldc
Joined: Dec 14, 2001
Posts: > 500
From: Philippines
PM, WWW
|
Hi All,
When you install Package 5, it will install the drivers for R520, T39, T65 and T68. You're done! Just select which one to use. |
GOwin
Joined: Jan 17, 2002
Posts: > 500
From: .uʍop ǝpısdn s&
PM, WWW
|
jh67
you can upgrade your driver setting to the newer inf file. find the upgrade driver button.
or better yet, get Package 5 as suggested by ArnoldC |
Talon88
Joined: Feb 06, 2002
Posts: 58
From: Canada
PM |
I use the WinXP Standard Driver & It's seen to work. I have make a new DUN Connection,
Use only " TCP/IP" and let TCP/IP auto-detect the IPs and DNS... But do i need to put somethings at area of "User ID" & "Password" ...
I am Using Rogers AT&T Canada...!
Thanks for you guys...!
|
GOwin
Joined: Jan 17, 2002
Posts: > 500
From: .uʍop ǝpısdn s&
PM, WWW
|
i leave mine blank. |
jh67
Joined: Nov 30, 2001
Posts: > 500
From: denmark
PM, WWW
|
Thanks Arnold & Gowin.
I'll have a go with the full-package-5 from the T-65.
Jan |
jeeves2001
Joined: Jan 23, 2002
Posts: 4
PM |
Hello
I am trying to connect my laptop (windows 95) through my Ericsson T68 to the internet. I can do it fine using a dial up connection but would like to use GPRS. I have set up a new Dial up account and used "*99**1#" as the phone number and left all else blank. I use the Server type PPP: Internet, Windows NT etc. I leave the Advanced options blank and select only TCP/IP from alowed network Protocols. The TCP/IP settings are set to server asign. When I try to use it to dial up through the IR port the phone says GPRS request denied and the laptop says Error 720: Check network config and try again.
So does anyone have any idea how i can get it to work????
Thanks
Jeeves |
jh67
Joined: Nov 30, 2001
Posts: > 500
From: denmark
PM, WWW
|
Jeeves : When the phone says that,..I'll have to ask one thing :
Do you have a GPRS-account with your phone-operator ?
If you do have a gprs-account, make sure that the phone's data-accounts are using the gprs as well (the data account for your email on the phone,..and email settings)
Jan
|
jeeves2001
Joined: Jan 23, 2002
Posts: 4
PM |
Yes. I can use GPRS to access wap pages from the phone fine. However it will not let me use GPRS to pick up my pop email.
I have tried playing around with the laptops settings but am not getting anyware!!! Any ideas?
Jeeves |
|
|
Posted: 2002-02-06 19:24
